Fitting The Mattress; Preparing For Use; Tips For Use - Auping K2 Manual De Instrucciones

All manuals and user guides at all-guides.com

3.6 Fitting the mattress

Put your bed in the horizontal position. Put the
mattress on the mesh base and centre it.
Make sure that the five protruding clip-on pins
of the anchors are pushed widthways into the
mesh (see fig. 5).
'Click' the anchors into the mesh at the positions
indicated (see fig. 6).
Make sure that the anchors are not directly
above a cross bar.
GB16
_006IH_3114 BW.pdf - pag.16

3.7 Preparing for use

Check that the mesh base can move freely.
Only adjust the mesh base while it is in a horizon-
tal position, securely fixed to the supporting
legs, or to the supports provided within the
bed surround.Check that the mattress is
attached to the mesh base properly.
Check that the mattress is attached to the
mesh base properly. Insert the plug into the
wall socket. The plug has a safety cut-out.

3.8 Tips for use

A new mattress has a certain amount of rigidity,
which will disappear within a few days.
Consequently, your mattress will not optimally
follow the contours of the mesh base when it
is initially adjusted. We therefore recommend
that you lie down on the mattress while adjusting
the positions for the first time.
fig. 5
fig. 6
LET OP !!! Lage resolutie!
November 9, 2007