Twin Star 28WM160 Manual De Instrucciones Adjunto página 5

Electric
Fireplace Insert
E-4
All manuals and user guides at all-guides.com
Mantel/Top
G
M
L
Completed
Assembly
Completed
Unit
Install
Insert
From Back
9. Locate Mantel/Top (G) and lay
finished side up on top of completed
assembly. From the inside, attach
the Mantel using Bolt (L) and Washer
(M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
10. Using Phillips head screwdriver tight-
en all Bolts alternating top and bottom,
left and right.
11. Remove the two mounting brackets at-
tached to the back of the Left and Right
Front panels. Set aside with the wood
screws.
Please read ALL "Electric Fireplace
Insert" instructions prior to installing
Electric Insert in your completed Fire-
place Mantel. Install the insert in your
fireplace close to its final position.
Move your completed unit only short
distances. Move completed unit with
great care. It takes two people to move
completed unit into its position.
12. Lift insert carefully into the back
of the unit and center in the insert
opening. Do not drag insert across
Base/Hearth as it may scratch
your unit.
13. Install the mounting brackets to hold
insert flush against the inside of the
mantel.
Twin-Star International, Inc.
Delray Beach, FL 33483
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 28WM160
Made in China
Printed in China
© 2006, Twin-Star International, Inc.