Electrical Installation; Pre-Installation - DURAVIT Happy D.2 760320 Instrucciones De Montaje

Electrical installation

Power supply
Fuse protection
RCD

Pre-installation

> Installing a permanent power supply line
(2 supply lines are required for the Combi/Jet L with a
temperature module):
Pre-connect a separate fuse and
residual current operating device (RCD)
Pre-connect an all-pole separating main switch
outside the prescribed safety areas (0 - 2)
Allow the supply line to protrude by 3,000 mm
> Laying the potential equalisation cable:
Allow the cable to protrude by 3,000 mm
6
Connecting the whirltub (Diagram 6)
NOTE! Avoiding any malfunctions!
Do not fasten the cables together with cable ties.
Do not install the supply line parallel to the control
cables.
I
Connect the supply line to the mains supply
socket.
II
Connect the potential equalisation cable to the
whirltub.
All manuals and user guides at all-guides.com
76xxxx xx x xx xx00: 50 Hz, 220 - 240 V AC
76xxxx xx x xx xx06: 60 Hz, 220 - 240 V AC
IN = 16 A
I
∆N
Safety areas in accordance with DIN VDE 0100-701
I
II
≤ 30 mA
6 0
0
0
6 0
1
2
0
L
N
PE
* or the height of
the highest shower
head / water outlet
that is permanently
installed; depending
on which is higher
7
WH_M_Einbau_Fliesen_Oval/15.12.3