Technical Data - ProStar USG OT 2 Manual De Instrucciones

All manuals and user guides at all-guides.com

TECHNICAL DATA

MODEL
DESCRIPTION
VOLTAGE
POWER
CAPACITY
SIZE OF THE APPLIANCE
SIZE OF THE CAVITY
GROSS WEIGHT
NET WEIGHT
INSTRUCTION FOR THE ASSEMBLY, USE AND
MAINTENANCE OF TOASTERS
Before any operation, read carefully the instructions and keep them.
The operations explained in paragraph 1, "instructions for assembly",
are to be carried out by a qualified electrician and never by the
user. The manufacturer accepts no responsibility in case of failure to
respect these instructions.
1) INSTRUCTION FOR ASSEMBLY
The installation operation must be carried out by a qualified
electrician and according to existing standards. When the appliance
has been removed from its packaging, take off the adhesive plastic
film that protects the steel parts. The glue residues must be removed
accurately (do not use abrasive products). Check, by adjusting the
feet, that the appliance is perfectly levelled on its base. The
appliance is set for alternating current operation at the power
indicated on the rating plate. In the power cord, the earth
conductor is marked by green-yellow colours. The appliance is
supplied with a cord conform to the power indicated on the rating
plate. If a direct network connection is required, place
magnetothermic switch on the circuit supplying the appliance.
The earth yellow-green cable must not be discontinued.
USG OT 2
PROFESSIONAL TOASTER OVEN
120V
1650W
12 toasts
19.5 x 9.9 x 12.5 (")
14.5 x 9.8 x 9 (")
24.2 lbs
22 lbs
4
USG OT 2- 070305