Twin Star 26MM1066 Instrucciones De Montaje página 6

3. Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Locate the Center Shelf (P) on the top of the
assembly from the step 2, as shown in diagram.
Make sure that dowels are seated into the pre-drilled
holes.
Using Bolts (AA) and Washers (BB) attach these
panels through pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA Bolt
BB
Washer
CC Wood Dowel
4. Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Push Support Panel (K) snug to the Center Shelf (P),
tighten Bolt (AA) and Washer (BB) through the
pre-drilled holes.
Locate upper side panels (I, J) on the top of the
assembly from the step 3, as shown in diagram.
Make sure that dowels are seated into the pre-drilled
holes.
Using Bolts (AA) and Washers (BB) attach these
panels through pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
BB
Washer
CC Wood Dowel
5. Insert one Wood Dowel (CC) into each of the
pre-drilled holes on the top edges of the Assembly
from step 4. Then locate Mantel/Top (G) and lay
fi nished side up on top of completed assembly. From
the inside, attach Mantel/Top (G) using Bolt (AA) and
Washer (BB) through the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
Using Phillips head screwdriver tighten all Bolts
alternating top and bottom, left and right.
Hardware Used
AA Bolt
BB
Washer
CC Wood Dowel
All manuals and user guides at all-guides.com
x 10
x 10
x 8
x 6
x 6
x 6
x 6
x 6
x 6
5
Fig. 3
P
CC
Fig. 4
AA
BB
J
K
CC
BB
AA
Fig. 5
G
CC
BB
AA
CC
BB
AA
I
CC
CC