Technical Characteristics - EYEON 080211 ED 10 Manual Tecnico

Eyeon module 080211 ED 10 has 1 output, which controls an
EN
on-board 10A relay (can be programmed as a NO. NC. output
using suitable programming software).
Module 080211 ED 10 allows flush mounting in residential series boxes
or on DIN rails.
Power supply voltage
Absorption
Outputs
Indications
Positioning
Approvals
Operating temperature
Storage temperature
Relative air humidity
Weight
Dimensions

TECHNICAL CHARACTERISTICS

24Vdc ± 5%
MAX 15mA
• 1 10A relay output (230 Vac),
resistive loads
• 1 LED (red) indicating relay active
• 1 bus status
(yellow): when flashing,indicates
data transmission via bus, when
lit steadily indicates lack of power
supply negative or incorrect device
connection
On DIN rail or in flush-mounted
boxes
CE
0° to 50°C
-10° to +70°C
5 to 95% with no condensation
70 g (not including packaging)
46x43x18mm (1 DIN module)
indicator LED