Tabla de contenido
Publicidad
INSTRUCTIONS FOR USE
1 Totally unwind the power cord.
2 Open the water tank cap (G).
still water, corresponding to one and a half measuring cup (Fig. 4).
Warning!
If the tap water is particularly hard (higher than 20°F), use a mixture of 50% tap water and
50% demineralized water. To extend the life of the product we recommend, only use demin-
eralised water.
4 Close the water tank cap.
5 Fasten the washable cloth (1) to the velcro couplings (L) located under the steam head (Fig. 5).
Warning!
Do not use the appliance without the cloth or if the cloth is worn-out.
treated are resistant to or compatible with the steam high temperature. In case of treated
cotto tile or wood surfaces, delicate fabrics (such as leather, silk or velvet) or synthetic fab-
rics, try to use the appliance before on a hidden area or a sample or ask for information about
the correct cleaning methods to the manufacturer.
6 Connect the plug into the socket. The power-on indicator (K) will automatically light up, indicat-
ing that the appliance is turned on and that the boiler starts heating. After a few seconds steam
will start to come out from the steam head.
steam emission to a higher level.
Warning!
ring can be removed using a common descaling product or with a few drops of vinegar.
To make it easier to clean hard-to-reach areas, such as under furniture, the appliance can be used
horizontally.
Hold the steam head (A) steady with one foot and manually put the rod (C) in vertical position until
you hear a "click" sound to go back to using the appliance vertically.
21
Publicidad
Tabla de contenido
