Troubleshooting; Specifi Cations - Panasonic nanoe EH-HS0E Instrucciones De Operación

Troubleshooting

Problem
• Sparks are generated inside the nanoe™
Outlet.
• The nanoe™ Outlet emits a noise
(crackling noise).
When the temperature is set to [230], [200],
or [180] it blinks alternately between
230 °C, 200 °C, or 180 °C and 170 °C.
All temperature setting lamps keep blinking.
It takes time to reach operating
temperature.
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by
Panasonic for repair.
Specifi cations
100 - 120 V
Power source
Power consumption
The amount of power consumption is determined as the arithmetic mean value of the power input occurring during a
representative period.
This product is intended for household use only.
16
EH-HS0E_EU.indb 16 EH-HS0E_EU.indb 16
Dust, styling products, etc. are adhered
to the pin-shaped portion where
nanoe™ is generated.
It is on standby mode.
The time to reach operating
temperature (approximately 100 °C)
differs depending on the area.
220 - 240 V
50 - 60 Hz 50 - 60 Hz
50 W
Possible cause Action
Clean the nanoe™ Outlet to
remove any adherents.
When resuming use, press
the [+] or [-] temperature
setting switches and return
the temperature setting to
230 °C, 200 °C, or 180 °C.
Please request an inspection
or repair from place of
purchase.
24/2/2564 14:30:52 24/2/2564 14:30:52