Jasco SunSmart Guia De Inicio Rapido

Indoor Digital
SunSmart™
Plug-in Timer
Up and down arrows
Scroll to set current time and scroll
to schedule program
my on/my off times
Set custom On/Off times
Evening preset
Set On/Off time, to dusk - 12am
Reset button
Clears all current times and schedules —
resets timer to factory settings
1. Setup
If no numbers are visible on-screen, plug timer into an outlet and let
timer charge for 1 hour. Once charged, press the reset (
in the lower right corner using your finger, a toothpick or pencil.
Note: If no buttons are pressed for 10 seconds during the initial
setup of the timer or when setting additional programs, timer
returns to clock mode. To enter setting mode, press and hold
( ) for 3 seconds, clock will start blinking. Press and release
( ) to advance to next setting. The timer will cycle thru the
following: time year month day
   
After reset, clock will blink for 10 seconds. Use up (
( ) arrows to set current time (take note of AM or PM time) and
press set ( ).
"YEAR" will blink onscreen. Press set (
Use arrows ( ) to change year if needed and press set (
"MON" will blink onscreen. Press set ( ) and it will show "01." Use
arrows ( ) to select current month and press set (
"DAY" will blink onscreen. Press set ( ) and it will show "01."
Use arrows ( ) to select current day and press set (
"ZONE" will blink onscreen. Press set (
followed by "CENT," "SOU," "HI" and "ALAS." Use arrows (
select correct region (zone) and press set (
ALASKA
NORTH
CENTRAL
SOUTH
HAWAII
"DST" (daylight saving time) will blink onscreen. Press set (
it will show "ON" on the left of the screen. Press set (
leave DST on or use arrows to change to "OFF" before pressing set
( ).
Note: Choose DST ON if your area, observes daylight saving time.
The timer automatically adjust one hour as needed. Choose DST
OFF if your local area does not observe daylight saving time.
2. Programming options
Note: If the LED next to any button is illuminated, the program is
active. To deactivate, press the button again.
I. Choose your custom On/Off times
my on Time: Press and release "my on time" button, the clock
will begin blinking for 5 seconds. Set desired on time and press
set ( ). Days of the week will then blink on screen. Use arrows
( ) to select the correct day(s) and press set (
my off Time: Press and release "my off time" button, the clock will
begin blinking for 5 seconds. Select desired off time and press set
( ). Days of the week will then blink onscreen. Use arrows
( ) to select the correct day options and press set (
FCC Statement
This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS standards. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions may cause harmful interference to radio communications.
However, there is no guarantee interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
Clock vs. set mode indicator
clock
SA
my on
my o
time
time
sunset sunrise
on
) button
r
eveing my extra
programs
12am
DST zone exit setting.
 
) and down
) and it will show "2017."
).
).
clock
).
) and it will show "NOR,"
) to
). See figure below.
NORTH
CENTRAL
my on
time
SOUTH
sunset
on
) and
eveing
) again to
12am
clock
my on
).
time
).
sunset
on
eveing
12am
clock set
PM
SA
set
my on
my o
time
time
sunset sunrise
PM
on o
eveing my extra
programs
12am
r
Sunset On: Press and release "sunset on" button and the sunset time
will blink onscreen for 5 seconds. Use arrows (
o
screen up to 1 hour in either direction and press set (
week will then blink onscreen. Use arrows (
day options and press set (
Sunrise Off: Press and release "sunrise off" button and the sunrise time
will blink onscreen for 5 seconds. Use arrows (
up to 1 hour in either direction and press set (
r
will then blink onscreen. Use arrows (
options and press set (
II. Preset schedules
Evening preset: This option will turn the light on at sunset and off at
midnight. Press and release the "evening (
setting mode, the sunset time will blink onscreen for 5 seconds. Use
arrows ( ) to adjust time up to 1 hour in either direction and press
set ( ). Days of the week will then blink onscreen. Use arrows (
set to select the correct day options and press set (
III. Extra programs
This option offers 7 additional custom ON/OFF programs. Press and
PM release the "my extra programs" button to enter setting mode. "1 ON" will
SA blink onscreen for 10 seconds, but no time displayed, only "--:--" appears.
Press set ( ) to select Program 1 "1 ON" and the "--:--" will blink
onscreen. Use the arrows (
Days of the week will then appear and blink onscreen. Use the arrows
( ) to select the desired days of the week and press set (
Program 1 ON is set. Press set (
my o
enter set mode for 1 OFF. Follow the same process to set off time. To go to
the next program, press set (
time
to select the next program you want to set. When finished, press "my extra
programs" button, or simply stop pressing buttons and the display reverts
to clock mode after 10 seconds.
sunrise
To skip through without setting, or to check program settings, press and
o
release the "my extra programs" button to enter setting mode, then use the
arrows ( ) to cycle though Programs 1-7. After Program 7 (7 OFF), the
my extra
menu starts over with Program 1 (1 ON). The LED indicator light will remain
on if any of the extra programs are set.
programs
To delete one of the my extra programs: Enter setting mode and use
r
arrows ( ) to select program to delete. Select set (
set
( ) to scroll time back to between 11:59pm and 12:00am. The display
will show "--:--" to confirm the program has been deleted. The display will
blink for 10 seconds and will revert to clock mode.
IV. Days of the week options order
PM
Days of the week options will display in the following order when using
SA
the arrow unless you are using the settings in "my extra programs."
In this case, they will begin with the last on time that was set.
M thru Su — all days of the week
M thru F
Sa, Su
my o
Su thru Th
time
F, Sa
Su thru Sa — each day of the week separately
sunrise
o
WARNING
my extra
RISK OF ELECTRIC SHOCK
• PLUG DIRECTLY INTO AN
programs
ELECTRICAL OUTLET
• DO NOT USE IN WET LOCATIONS
• FULLY INSERT PLUG
r
• USE INDOORS ONLY
• UNPLUG TIMER BEFORE CLEANING
• KEEP CHILDREN AWAY
RISK OF FIRE
• DO NOT USE TO CONTROL APPLIANCES
THAT CONTAIN HEATING ELEMENTS
(COOKING APPLIANCES, HEATERS,
IRONS, ETC.)
• DO NOT EXCEED ELECTRICAL RATINGS
• DO NOT USE WITH EXTENSION CORDS
AM/PM indicator
Day of week indicator
Set button
Press to select various options
Sunset on/sunrise off times
Set On/Off time, to sunset/sunrise
or +/- 1hr
My extra programs button
Offers seven additional On/Off
programs
) to adjust time
). Days of the
) to select the correct
).
) to adjust time
). Days of the week
) to select the correct day
).
-12AM)" button to enter
).
) to select time and press set ( ).
).
) again or use the arrows ( ) to
) or use the arrows ( ). Press set (
). Use arrows
MADE IN CHINA
Distributed by Jasco Products Company LLC, 10 E.
Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM – 8PM CST.
Specifications:
125V 50/60Hz
15A 1875W General
Purpose/Resistive
10A 1250W Tungsten
1/2HP
Works with dimmable
LED and CFL bulbs.
clock
set
PM
SA
clock
set
my on
my o
time
time
PM
SA
sunset sunrise
on o
eveing my extra
my on
my o programs
12am
clock
set
time
time
r
sunset sunrise
PM
on o
SA
eveing my extra
programs
12am
)
r
my on
my o
time
time
sunset sunrise
on o
my extra
eveing
programs
12am
r
)
MTS53000
Patent pending
U.S. Pat 9,320,122
35150 v2 01/29/19