sunjoe HJ605CC Manual Del Operador página 11

Operation
IMPORTANT! The product is intended for light-duty trimming
of shrubs and lawn edges for residential properties.
NOTE: Charge the battery for 3 to 5 hours then use it until it
runs down (i.e. the tool will only slowly operate and the yellow
charger indicator will be illuminated). Recharge for 3 to 5 hours
again before resuming operation.
m
WARNING!
The blades continue to move for a few
seconds after the tool is switched OFF. Turn OFF the tool and
wait until the blades come to a complete stop before adjusting
or cleaning.
m
CAUTION!
Never touch the blade rail while the tool is
in operation and be aware of the sharp edges even when the
grass shear + hedge trimmer is not in use.
NOTE: Do not touch the rotating blades.
Pole Length Adjustment (Optional)
1. Loosen the telescopic lock by flipping it up (Fig. 17).
Fig. 17
Telescoping lock
2. Pull the lower pole out or push it together to adjust to the
desired length (Fig. 18).
Fig. 18
Lower pole
11
3. Tighten the telescopic lock by latching it back down
(Fig. 19).
Fig. 19
Telescoping lock
NOTE: The cam-lock nut may need to be loosened slightly in
order to adjust the telescoping pole length (Fig. 20). Use pliers
or hex key wrench, as needed.
Fig. 20
Cam-lock nut
Hex key wrench
Cutting Head Angle Adjustment
(Optional)
The telescoping pole is equipped with an adjustable head
which can be rotated to 5 different angles: -90°, -45°, 0°, 45°,
90° (Fig. 21). Follow the instructions to adjust the angle.
Fig. 21
-90°
45°
-45° 0°
90°