Pando PHB-961 Manual De Uso página 78

INOXPAN S.L.
PROGRAMMING COOKING TIME
1. Touch or
'00:00' will appear on the display.
2. Select the time after which you want the alarm to sound by pressing
beeps to confirm that the time has been set and the clock will start counting down from the
selected time. The symbol
3. Select a function and a cooking temperature using the oven commands.
4. Once the cooking time is up, the oven will turn off, an alarm will sound and the
flash quickly.
5. Touch any key to stop the alarm and turn off the
6. Set the controls to the
You can change the remaining cooking time at any time by touching
starts to flash quickly. Now press
With the Cooking Time function, the remaining time will show permanently on the display. You
cannot see the current time on the display when this function is set.
PROGRAMMING THE COOKING STOP TIME
1. Touch or
the current time on the timer display.
2. Select the time after which you want the alarm to sound by pressing
beeps to confirm that the time has been set and the clock will start counting down from the
selected time. The
3. 3. Select a cooking function and temperature.
4. When the cycle is finished, the oven will turn itself off, a buzzer will sound and
flash quickly.
5. Touch any sensor to stop the alarm and to turn off the
6. Set the controls to the
You can change the remaining cooking time at any time by touching
starts to flash quickly. Now press
until the symbol on the display starts flashing, then press
will flash slowly.
position to turn off the oven.
to change the time.
until the symbol on the display starts to flash and press
symbol will flash slowly.
position to turn off the oven.
to change the time
or
symbol. The oven will switch on again.
or
or
symbol. The oven will switch on again.
or
EN - 11
. The indication
. You will hear 2
symbol will
until the symbol
. You will see
. . You will hear 2
symbol will
until the symbol