First Steps - BlackBull PiQoo Instrucciones De Montaje Y Uso

EN
Introduction
Thank you for purchasing the PiQoo BBQ from BlackBull. With the PiQoo you have acquired a real
mobile all-rounder. Whether you want to grill quickly during your lunch break or spend time at the
weekend with your friends at the lake, the PiQoo can be taken anywhere at any time and quickly put
into operation. It also cuts a fine figure as a BBQ on balconies and terraces.

First steps:

1. Remove the PiQoo from its box and place it on a non-flammable surface.
2. Fill the PiQoo with wood or charcoal and use commercially available grill lighters. The PiQoo is
at operating temperature in approx. 15 minutes.
TIP:
If you want the PiQoo to heat up even faster, use a lighting chimney for barbecue charcoal.
3. Place the stainless steel grid on the fire basket. The PiQoo is now ready to use and you can start
grilling.
4. Let the charcoal cool down or extinguish it at the end of the grilling process.
SAFETY AND WARNING NOTICE 1:
The entire grill - including the bottom - will become hot during the grilling process. Therefore,
make sure that it is placed on a non-flammable surface such as stone floor, earth, etc.
Make sure that others (especially [small] children) do not get burned.
SAFETY AND WARNING NOTICE 2:
Corten steel forms a natural „patina" and protects the steel from rusting through. To avoid rust
stains on patio or balcony tiles, the PiQoo should not be placed directly on them.
BlackBull GmbH • Frankenhof 6 • 74245 Löwenstein • Germany • Phone: +49 7130 402 588 • bbq@blackbull-grill.de • www.blackbull-grill.de
6