General Information; Technical Specifications - Selecta Rotabit Manual De Instrucciones

MANUAL DE INSTRUCCIONES
J
.P. SELECTA s.a.u.
CODIGO 80014 REV E

2 General information

2.1 Handle the equipment with care. Unpack and check that all items coin-
cide with the delivery note. If you see any discrepancy or damage of
any kind, notify your distributor as soon as possible.
2.2 Read this manual before using the equipment.
2.3 These instructions are an important part of the equipment and should
be made available to all users.
2.4 If you are in any doubt or need clarity on the use of this instrument,
please contact your local distributor or the service department of J.P.
Selecta, s.a.u.
2.5 ATTENTION, ANY EQUIPMENT NOT CLEAN AND DISINFECTED
SHALL NOT BE REPAIRED.
2.6 Any unauthorized modification, lack of maintenance or deliberate damage
to the machine, transgresses the directive 2009/104/CE, where the
manufacturer will not be responsible for damages that could occur due
to undue care and attention.
2.7 Do not use the equipment for fluids that can produce vapours that can
form inflammable or explosive mixtures.

3 Technical specifications.

Supply voltage can be adjusted to 115V or 230V, according to the
needs of installation. The voltage set in factory is 230V.
Code:
Oscillations:
Dimensions:
Power:
Weight:
To change this value:
- Unplug the equipment from the mains.
- Make sure the supply voltage is correct. If the set value differs from
the supply voltage, the equipment may be seriously damaged.
- At the bottom of the equipment there is a switch to change the
voltage.
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
3000974
20-230 u/min
Height 20 cm
Width 42 cm
Depth 43 cm
80 W
13.5 kg
01/2022
Tel 34 937 700 877 Fax 34 937 702 362
Pag.: 15