Cleaning The Device; Technical Data - Adler europe AD 6310 Manual De Uso

Before first use.
1. Remove the packaging, stickers and accessories that are on the outside and inside of the device.
2. Thoroughly clean the grate (5) and the pot (8) with hot water with a little dishwashing liquid and a soft sponge, then wipe them
with a clean, soft cloth.
(Do not clean the device with abrasive cloths or sponges or use scouring powders as they may damage the smooth, non-stick
surface of the grill and the pot)
3. Place the main body (7) on a stable horizontal surface, connect the power cord (8) to a grounded power socket, set the
temperature knob (2) to 200 ˚C and the time knob (1) to 10 minutes to remove factory odors from the device.
4. When the device is finished, unplug the power cord (8) and repeat step 2 to clean it again after it is completely cool.
Do not wash the grate (5) and the pot (8) in the dishwasher.
Using the device:
1. Holding the handle (6) pull the pot (8) together with the grate (5) out of the body (7) (fig. 1) and place on a stable surface.
2. The grate (5) can be removed from the pot (8) (Fig. 3)
3. Place the previously prepared products on the grate (5) at the bottom of the pot (8). Then insert the pot (8) into the main body (7)
(fig. 2). When filling the pot, do not exceed the MAX level placed inside.
4. Connect the closed device into a grounded power outlet.
5. Once plugged in, turn the timer knob (1) to set the desired time. Use the knob (2) to set the desired temperature. The power (3)
and thermostat (4) indicator lights will light up..
It is recommended to add about 3 minutes to the food preparation time, relative to the desired time if the unit is cooled.
6. When the device is operating, the thermostat light (4) will switch on and off the device maintains the appropriate operating
temperature of the thermostat.
7. A beep indicates that the set time has passed. Pull the pot (8) out of the main body (7) and, holding the handle (6), empty the pot
(8) of the prepared products.
8. When you have finished working, set the timer knob (1) and temperature knob (2) to the "0" position and disconnect the
appliance from the mains.
9. To terminate the appliance early, turn the timer knob (1) to the "0" position.
Tips:
Arrange the pieces of food so that the hot air flows freely between them.
If the time or temperature is not sufficient, you can always adjust the time or temperature by adjusting the timer knob (1) and
temperature knob (2) to your taste preferences.
It is recommended to check with food backing status and stir the products at least once during operation.
Examples: (Indicative cooking time and temperature)
Fries: time 25 minutes / temperature 190 ˚C
Chicken wings: time: 25 minutes / temperature 170˚C
Fish: time 20 minutes / temperature 190 ˚C
Shrimps: time 20 minutes / temperature 160 ˚C
Steak: time 20 minutes / temperature 170 ˚C
Sausages: time 20 minutes / temperature 190 ˚C
!!WARNING!! The inside of the device is very hot

CLEANING THE DEVICE

1. Unplug the device from the power outlet and allow the device to cool down before cleaning.
2. Clean with a damp, then dry cloth (or paper towel).
3. Brush the more difficult to remove residue with a little edible oil and after a few minutes gently remove it with a wooden spatula.
4. Do not clean with sharp, abrasive cloths or sponges or use scouring powders as they may damage the smooth, non-stick coating
of the basket and pot.
5. Do not immerse the device in water.

TECHNICAL DATA:

Capacity max: 3 L
Voltage: 220-240V ~50/60Hz
Power Nominal: 1300W
Power Maximum: 2200 W
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the
plastic container Worn device should be returned to the appropriate point storage because it is
dangerous in the device ingredients may pose a threat to the environment. The electrical
device should be handed over to limit its reuse and use. If in the device there are batteries you
have to take out and give to the point stored separately.
5