EKS 0610 Manual De Instrucciones página 3

All manuals and user guides at all-guides.com
Functions
Clock:
Memory function will record the time of measurement to help recognize
individual measurements. (/4 format for hour, minute & date available)
• See "Clock setting" section for set-up of time when first used.
Room temperature:
A suitable room temperature is important for adults and babies. The
thermometer recognizes the room temperature.
• See "Clock setting" to enable this function. When turned off,
thermometer shows the room temperature with icon.
• See "Use of the thermometer" to learn how to get the room temperature.
Ear temperature:
The thermometer is designed for practical use and should not replace a
visit to the doctor. Always compare measurements with your regular body
temperature. This seems a strange sentence to have here. It has nothing to
do with the ear temperature.
• See "Use of the thermometer" to learn how to measure body
temperature in the ear.
Scan mode:
The scan mode shows a surface temperature which is different from the
body temperature. It is useful to monitor the temperature of an object
such as baby's milk.
• See "Use of the thermometer" to learn how to measure the
temperature of an object.
Stopwatch:
This function is useful for measuring heartbeat.
• See "Use of the thermometer" to learn how to use the stop watch
function.
Fever alarm:
If the thermometer detects a body temperature of more than 37.5°C
when measuring by the ear or forehead, there will be a long beep sound
followed by three short beep sounds which warn of potential fever.
Memory:
There are totally 9 sets of memories for ear and forehead measurements.
Each memory also records, together with the measurement, the date,
time, mode and site location.
• When switched on, press the ON/MEM button to recall the
temperatures stored with the icon.
°C / °F switch:
When the thermometer is turned off, the LCD displays the date, time and
room temperature. Press and hold the "SCAN" button and then
immediately press and release the "ONMEM" button. After 3 seconds the
icon °C will change to °F. The same procedure to change back to °C.
3