General Installation Instructions - Conergy PowerPlus Instrucciones De Montaje

3 Installation
| Only use mounting systems that can withstand the ex-
pected loads for snow, wind, etc.
| Make sure that no other system components will impair
the mechanical or electrical function of Conergy Pow-
erPlus modules.
| Only work with dry Conergy PowerPlus modules and
dry tools in dry conditions.
| Do not drill holes in the module frame or in the glass
surface and do not carry out any welding work on or
near to the Conergy PowerPlus modules.
| Comply with the applicable occupational health and
safety regulations (e.g. regarding protective clothing).
| The presence of a second party who can provide help
in the event of an accident is obligatory during the en-
tire installation process.
| Keep a copy of this installation manual in the immedi-
ate vicinity of the system.
Fig. 3-1: Dimensions [mm]
2
3 Installation
3.1

General installation instructions

| Make sure that all locally applicable standards, con-
struction regulations and accident prevention regula-
tions are complied with.
| We recommend the Conergy SunTop frame for installa-
tions on sloping roofs.
| Select an installation location with the maximum sun-
light at all times of the year. Avoid shaded areas.
| In northern latitudes, orient the photovoltaic modules
to the south. Determine the ideal setting angle accord-
ing to the latitude of the installation location. Request
this information from your specialist solar energy
dealer or find it in the official tables.
| You can find further installation instructions in the
installation manual for the relevant frame.
The photovoltaic modules may be bolted or clamped in
place depending on the design of the frame. The mount-
ing frame must be made from material that is resistant to
corrosion and atmospheric conditions and able to with-
stand the loads required.
Installation manual Conergy PowerPlus