Assembling Your My Cot
STEP 1
To open, pull the four corners away from each other. The frame and bed
surface will automatically unfold.
NOTE:
Check that the bed is opened as far as possible and that there
are no loose parts before use.
STEP 3
Place canopy on top of My Cot
over around cot leg corners.
®
. Wrap all four canopy straps under and
®
STEP 2
Remove strap from center of canopy.
NOTE:
Do not discard of strap. Keep for future use.
STEP 4
To open canopy windows, roll flaps to side and tie straps. To close,
connect velcro on windows.