▪
Do not expose the appliance to direct sunlight.
▪
Keep the appliance away from candles, luminaries and open flames,in order to avoid fire risk.
▪
This appliance is only designed
▪
The appliance is heavy. Be careful when moving it.
▪
If your appliance is equipped with castors, remember that these are only designed to facilitate
minor movements. Do not move the appliance over long distances.
▪
Do not lean or climb on the appliance or its elements.
▪
In order to avoid falling objects and to prevent damage to the appliance, do not overload the
compartments of the appliance.
Caution! Cleaning and servicing
▪
Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic
solvents or abrasive substances.
▪
Do not use sharp or pointed objects to remove ice. Use a plastic Scraper.
Important information concerning installation!
▪
This refrigerating appliance is not intended to be used as a built-in appliance
▪
To ensure proper electrical connection, follow the recommendations given in the present manual.
▪
Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the
packaging.
▪
It is recommended that the appliance be allowed to settle for at least 4 hours before connecting
the electrical power supply, so that the compressor fluid feed is correct.
▪
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe
the installation recommendations Provided.
▪
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls
or with any hot element (compressor, condenser). Observe the installation recommendations.
▪
The appliance should not be placed close to radiators or cooking hot plates or gas
▪
Check that electrical sockets remain accessible when the appliance is Installed.
Power saving
To limit the electricity consumption of your appliance:
▪
Install it in an appropriate place (see "Installing your appliance").
▪
Leave the doors open as little time as possible.
▪
Regularly inspect the door seals and ensure that they are still closing properly. If this is not the
case, contact your after-sales service.
Trouble shooting and spare parts
▪
Any electrical work should be carried out by a qualified and skilled technician.
▪
The appliance should be repaired by an accredited repair center, using
only manufacturer's original spare parts.
The list of spare parts and the procedure for ordering them (professional access / final consumer
access) are available on the following website: www.interfroidservices.fr or by post to the following
address: Interfroid Services, 143 Bd Pierre Lefaucheux - 72230 ARNAGE.
All FRIO wine cellar benefit from a 1-year parts warranty.
to store wines and drinks.
16
rings.