Mounting The Lock (Lock Version Only); Mounting The Lock (No Lock Version Only) - Dometic DM 20D Manual Del Usuario

Installation
6.4

Mounting the lock (lock version only)

1. Drill a hole with a diameter of 35 mm (1.4 in.) into the decor.
2. Mount the lock together with the lock decor.
6.5

Mounting the lock (no lock version only)

Disassembling the drawer (fig. 7, page 7)
1. Open the drawer completely.
2. Press the rail lock (A 1).
3. Pull the drawer out of the cabinet.
4. Remove the gasket (B 1).
5. Remove the lock cover (B 2).
6. Remove the plugs (C 1) from the screws of the door handle (C 3).
7. Unscrew the screws (C 2) of the door handle (C 3).
8. Remove the door handle (C 3).
Drilling the holes (fig. 8, page 7)
1. Drill a hole with a diameter of 25 mm (0.98 in.) through the decor and the door
(A 1).
2. Unscrew the screws (B 1) of the decor frame (B 2).
3. Remove the decor frame (B 2).
Assembling the lock (fig. 9, page 8)
1. Put the new lock cover (A 1) into place.
2. Put the decor (B 1) into the decor frame (B 3).
3. Screw the decor frame (B 3) onto the door (B 2).
4. Install the door lock (C 1).
5. Install the lock catch in the cabinet (D 1).
Assembling the drawer (fig. 0, page 8)
1. Push the gasket (1) on the decor frame (2).
2. Screw the door handle (4) onto the door.
3. Push the plugs (3) on the screws of the door handle (4).
4. Push the drawer into the cabinet.
18
DM20
EN