DMI Bamboo Instrucciones De Montaje

3
3
b
1
a
b
a
2
Distributed by:
Duro-Med Industries
Div. of DMS Holdings Inc.
1931 Norman Drive South
Waukegan, IL 60085 USA
www.mabisdmi.com
Made in China
Toll-Free Customer
Care Help Line
877-505-6190
#910-1704-5999 01/09
©2009 Duro-Med Industries
3
b
3
a
b
a
b
a
4
Assembly Instructions
NOTE: No tools required.
1. Place the bamboo seat (4) upside down on a flat surface.
2. Place the legs (1&2) on the seat (legs facing up) and
align the holes on the seat with the holes on the legs.
Use the thumb screws (b) and washers (a) to secure the legs
to the seat.
3. Insert the extension legs (3) into the support legs (1&2).
Adjust the legs in 1" increments to the desired height,
and lock the pins into place.
CAUTION: Make sure all thumb screws are tightened securely.
For your safety, the four extension legs must always be locked
into the same height position. All pins must be pushed
completely through the pinholes before using.
NOTE: Please call the Toll-Free Customer Care Help Line at
1-877-505-6190 if any parts are missing. Do not return to the
place of purchase.
Assembly Code
1 - Support Leg
2 - Support Leg
3 - Extension Legs (4 included)
4 - Bamboo Seat
a - Washers (5 included)
b - Thumb Screws (5 included)
CAUTION
This product contains natural rubber latex
which may cause allergic reactions.