Zyxel DMA2501 Guia De Inicio Rapido página 6

Point the remote at the black dot on the front of the DMA2501. The
DMA2501 remote is sensitive to input from the remote. Holding a button
on the remote down may register as multiple pushes.
3. Turn on the DMA2501. The POWER light turns green.
Check your power connection if the power light does not
come on.
4. If the DMA2501's picture displays on the TV properly, continue to the
next step. Otherwise, use the remote's OUTPUT button to change the
video mode. Wait a few seconds during each mode. When you get to
the correct mode, use the arrow and OK buttons to select OK.
5. Press the remote's SETUP button. Use the arrow and OK buttons to
select System Setup.
6. Press OK to select Language.
8