Repairs should only be carried out by qualified technicians using original
replacement parts, otherwise it may result in considerable danger to the
user.
The appliance is for indoor use only.
•
The appliance must be positioned so that the plug is accessible at all times.
•
This air conditioner can only be used in a household environment, not for
•
commercial industry.
The reserved space around the air conditioner should be at least 12"
•
(30cm).
2. USE AND OPERATION
2.1. Product Description
1. Speed Control: Turn the position switch to select the speed. The numbers 0,
1, 2, 3 on the board represent power off, slow, moderate and fast.
2. Tilting Angles: By pushing the blade-guard, you can adjust the fan to the
preferred angle.
3. Do not touch the blades with your hands or with any hard object when the
fan is running.
3. CUSTOMER SERVICE
Becken has designed this appliance in order to guarantee maximum reliability.
However, if a problem occurs you may be able to determine its cause by
following the procedures suggested in this section.
Do not attempt to open the appliance – there is a risk of electrical shock.
If you are not able to solve the problem please contact your seller or
manufacturer.
All users must be familiar with this section. Knowing what could go wrong can
help to prevent problems occurring.
WARNING: any attempt to repair the appliance without contacting the
manufacturer will void the warranty.
If the problem persists take your appliance to the customer service of any
Worten, Modelo or Continente store in order to solve the problem.
Worten Equipamentos para o Lar provides a 2 year warranty for manufacturing
defects from the date of purchase of the appliance. The warranty is applicable
for correct use and maintenance of the appliance, namely according to the
instructions in this manual. Malfunctions caused by any other situations are
not covered by the warranty.
The repair of electric appliances must only be made by qualified technicians in
order to prevent future problems.
6
G301MA_AF2_Ventoinha_BFF2380_18.indd 6
01.02.16 16:47