TaoTronics TT-SL209 Guia Del Usuario página 5

Retractable Antenna
LED Indicator
①
ON / OFF Button
②
Motion Speed
Timer
③
Color
Flash
Timer Reset
④
⑤
Syncing the Remote
• With your remote ready (battery installed) within the operating range of the laser
light (approx. 10 meters / 33 feet), connect the light adapter to a power source.
• Press and hold the ON / OFF button for 5 seconds on your remote to sync it to the
laser light.
• Do not press the ON / OFF button at the same time when you plug in the adapter to
the power supply.
• You can sync multiple laser lights with one remote control.
All manuals and user guides at all-guides.com
⑥ ⑦ ⑧
• Re-syncing the remote with the laser light may be needed from time to time.
• To re-sync, unplug the laser light from the power source, then repeat the
rst two steps.
• To sync with more than one laser light, unplug them all, wait 1 minute, plug
them back in at the same time, and then press and hold the ON / OFF
button within 5 seconds.
• Remove the battery from the remote if not using for a long period of time.
For the best signal
reception, please fully
extend the antenna.
Make sure the batteries are
installed following the correct
polarities and in good
contact with the remote.
05/06