THINK GIZMOS DINO HUNTER Manual De Usuario página 5

3. Place the tail at the bottom of the body of the dinosaur, take care to line up the grooves
of the dinosaurs body to the tail.
4. Push the tail into the body and turn clockwise to secure. You should hear a small click as
it locks into place.
5. To remove the tail and battery compartment turn the tail counter-clockwise to release
and then pull the tail away from the dinosaur.
Dino Gun Battery Installation
A small crosshead screwdriver (Phillips) is required to remove the battery compartment on
the Dino Gun.
1. Turn the screwdriver Counter Clockwise to open the battery slot of the Dino Gun.
2. Insert 2xAAA Batteries (Supplied) into the battery slot, observing the correct polarity as
shown on the battery cover.
3. Close the battery cover and turn the screw using the screwdriver to secure.
5