Installation Instructions; Access Door Care; General Cleaning; Assistance - Kitchen Aid 780-0019 Manual De Uso

1. Remove access door from mounting frame by lifting the
door up and off the mounting frame hinge.
2. Install mounting frame flush to the face of the cabinet
cutout. Make sure the mounting frame is level.
IMPORTANT: For routine cleaning, wash with soap and water using a soft cloth or sponge. Rinse with clean water and dry at
once with a soft, lint-free cloth to avoid spots and streaks.
Do not use steel wool to clean the product, as it will scratch the surface.
STAINLESS STEEL
IMPORTANT: To avoid damage to stainless steel surfaces, do
not use soap-filled scouring pads, abrasive cleaners, cooktop
polishing creme, steel wool, gritty wash cloths or paper towels.
Cleaner should not contain chlorine. Damage may occur.
Spills may cause permanent discoloration.
Cleaning Method:
Rub in direction of grain to avoid scratching or damaging

the surface.
Stainless steel cleaner.

Liquid detergent or all-purpose cleaner.

Rinse with clean water and dry with soft, lint-free

cloth.
Vinegar to remove hard water spots.

Glass cleaner to remove fingerprints.

When calling, please know the purchase date and the complete model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you have questions or need to order replacement parts, contact Customer Service Center at 1-877-373-2301 .
Please direct all correspondence to:
Nexgrill Industries, Inc.
14050 Laurelwood PI,
Chino, CA 91710
Please include a daytime phone number in your correspondence.

INSTALLATION INSTRUCTIONS

ACCESS DOOR CARE

General Cleaning

ASSISTANCE

3. Install screws (not supplied) into holes located on the
mounting frame.
4. Replace access door by placing the door back on the
mounting frame hinges.
EXTERIOR and INTERIOR
The quality of this material resists most stains and pitting,
providing that the surface is kept clean, polished and covered.
Cleaning Method:
Apply stainless steel polish to all areas before first use.

Reapply after each cleaning to avoid damage.

Cleaning should always be followed by rinsing with clean,

warm water.
 Use a metal polish or stainless steel brightener to remove
fingerprints, water spots, oxidation, and food stains.
Always follow the manufacturer's directions.
Wipe the surface completely dry with a soft cloth.

6