Adjusting The Handlebar - Sunny Health & Fitness SF-B1852 Manual Del Usuario

26
26
11 2

ADJUSTING THE HANDLEBAR

Loosen and pull out the T Shape Knob (No. 14) to raise or
lower the Handlebar (No. 26) to the desired position. Make
sure the T Shape Knob (No. 14) settles into the desired hole
and secure it firmly by turning clockwise.
ADJUSTING THE PEDAL STRAP
Place the ball of each foot in the toe clips so the front of your
shoe fits snugly in the toe clip cage. Rotate one foot to within
arm's reach and pull the strap until the top clip cage fits your
shoe snugly. Insert the strap back into the hoop of the toe clip.
Repeat this for the other foot.
DISMOUNTING THE BIKE
WARNING! Do not dismount the bike or remove your feet from
the pedals until the pedals have stopped completely. You can
stop the flywheel at anytime by pushing down on Brake Handle
(No. 71).
MOVING THE BIKE
To move the bike, first ensure that the Handlebar (No. 26) is
properly secured. If the Handlebar (No. 26) is loose, tighten the
T Shape Knob (No. 14) to secure it. Next, stand at the front of
the bike so that you're directly in front of the Handlebar (No.
26). Firmly grasp and hold each side of the Handlebar (No. 26),
place one foot on the Front Stabilizer (No. 2) and tilt the bike
towards you until the Transportation Wheels (No. 11) on the
Front Stabilizer (No. 2) touch the ground. With the wheels on
the ground, you can transport the bike to the desired location
with ease.
17