Chapter 1 : Introduction; Chapter 2 : Technical Description - Analog way POWER 1024 Manual Del Usuario

Chapter 1 : INTRODUCTION

1-1. SUPPLIED EQUIPMENT
• 1 POWER ™
1024.
• 1 External Power Supply (UK, US or EEC version).
• 1 VGA cable (HD15 male / female connector).
• 1 S.VIDEO cable (mini DIN 4 / mini DIN 4).
• 1 RCA cable (male / male).
• 1 RCA + Jack 3.5 to SCART cable (Europe only).
• 1 User's Manual.
1-2. GENERAL INFORMATION
™
The POWER 1024 is a computer to video scan converter, which accepts incoming inputs up to 1024x768 from any PC
(personal computer) and converts them into Video display, at low cost.
™
The POWER 1024 is a fully stand alone external box with a dedicated, highly integrated ASIC component. This
dramatically reduces the associated "glue logic".
The scan conversion's overall hardware ensures maximum security and future-compatibility (Dos, Windows, Unix). In
addition, the PC to TV conversion will never cause interference on your data monitor.
™
1-3. POWER 1024 REFERENCES
REFERENCE
P1024p-NTSC-US
P1024p-NTSC-UK
P1024p-NTSC-EUR POWER
P1024p-PAL-US
P1024p-PAL-UK
P1024p-PAL-EUR

Chapter 2 : TECHNICAL DESCRIPTION

2-1. FRONT PANEL
FREEZE:
STD / NI:
POWER:
2-2. REAR PANEL
POWER IN:
VGA IN:
S.VIDEO OUT:
VGA OUT:
COMPOSITE OUT: Composite video output (RCA connector).
STD / OVER:
:
All manuals and user guides at all-guides.com
POWER
™
POWER 1024 with NTSC output and US power supply (PLUG NEMA 1-15).
™
POWER 1024 with NTSC output and UK power supply (PLUG BS 1363/A).
™
1024 with NTSC output and EEC power supply (PLUG EN 50075).
™
POWER 1024 with PAL output and US power supply (PLUG NEMA 1-15).
™
POWER 1024 with PAL output and UK power supply (PLUG BS 1363/A).
™
POWER 1024 with PAL output and EEC power supply (PLUG EN 50075).
Allows to freeze the displayed output (The freeze is active when the LED is turn ON).
3 positions anti-flicker (non interlaced output included: NI position)
LED indicating power plugged.
Power supply input connector (+ 9 Vdc, 0.65 A).
Computer input (HD15 male connector).
S.VIDEO (Y/C) output (4-pin mini DIN connector).
Data monitor output (loopthrough on HD15 female connector).
Standard (STD) or Overscan image mode.
• [standard] = The entire image is visible on the screen.
• [overscan] = The image is displayed about 8 % bigger than in standard mode, to avoid seeing
the corners and the borders. Standard TV display mode is overscan.
Horizontal position adjustment.
Vertical position adjustment.
™
1024
DESIGNATION
POWER™ 1024
PAGE 5