Getting Started; Functional Description; Powering Your Monitor; Operating The System - Samsung SafeVIEW Manual Del Usuario

G s
ettInG tarted

Functional Description

Powering your monitor

After opening the box, fully charge the monitor before use. After initial charge, recharge
as needed.
Wireless Monitor
You can use the device while charging with connected adapter, and the device is
portable if charged.
Wireless Camera
The Wireless Camera must be plugged in at all times in order to view.
Check if the Power LEDs of wireless monitor is turned on.
`
n
6 · Getting Started
SEW-3037W-ENGLISH.indd 6
All manuals and user guides at all-guides.com

operating the System

The basic operation is as follows:
Pairing
The units already come paired for your convenience. This button is
used to add an additional camera. User can select camera number
to assign. Up to 4 Cameras may be paired.
Power on and turn the switch ON.
1.
The power LED for the monitor should be ON.
Press the [MeNu] button on the monitor.
2.
Select [ ] by pressing [_] or [+] button.
3.
Select camera number by pressing the [$] or [%] button. Press [
4.
confirm.
A pairing icon comes out and search a camera which sets to pairing mode.
A count down clock appears at the middle of top icon bar which starts counting
from 30 to 0.
Press the [PAIr] button on the camera.
5.
Within 30 seconds, if the monitor successfully pairs with the camera, the monitor
6.
will automatically switch to the camera's current view.
After 30 seconds, if no camera registered, it will show "Out of Range" icon and user
`
n
needs to switch back to previous camera number through menu operation.
] button to
2012-09-03 오전 11:37:14