Intercal BTN-201C Manual De Instalación, Uso Y Mantenimiento página 35

código del error
04_Ventana para el
ventana se muestra el Nº y la descripción del error.
Fault Code No.
0 No Fault OI-b
1 Brake channel over current OL-br
2 Brake resistor overload O-I
3 Instantaneous over current I.t-trp
4 Motor Thermal Overload (I2t) SAFE-1
5 Reserved O-Volt
6 Over voltage on DC bus U-Volt
7 Under voltage on DC bus O-t
8 Heatsink over temperature U-t
9 Under temperature P-dEF
10 Factory Default parameters have been loaded E-trip
11 External trip SC-ObS
12 Optibus comms loss FLt-dc
13 DC bus ripple too high P-LOSS
14 Input phase loss trip h O-I
15 Instantaneous over current on drive output. th-Flt
16 Faulty thermistor on heatsink. dAtA-F
17 Internal memory fault. (IO) 4-20 F
18 4-20mA Signal Lost dAtA-E
19 Internal memory fault. (DSP) U-dEF
20 User Default Parameters Loaded F-Ptc
21 Motor PTC thermistor trip FAN-F
22 Cooling Fan Fault O-hEAt
23 Environmental temperature too high Out-F
26 Drive output fault AtF-01
40 Measured motor stator resistance varies between phases. AtF-02
41 Measured motor stator resistance is too large. AtF-03
42 Measured motor inductance is too low. AtF-04
43 Measured motor inductance is too large. Out-Ph
44 Output (motor) phase missing Out-Ph
49 Output (Motor) phase loss SC-F01
50 Modbus comms loss fault SC-F02
51 CANopen comms loss trip
códigos del error de la comunicación ModBus (PLC-Driver)
05_Ventana para los
BTN-201C_V1.0C / 11-2018
. En caso de mal funcionamiento del variador, en esta
Description
35
.