Leroy Merlin YT4334-01 1800W Manual Del Usuario página 285

Switch the product off and make sure that all moving parts have come to a complete stop. Attach the
blade sheath. Remove the plug and let it cool down. Check, clean and store the product as described
below.
5. TRANSPORTATION
Transporting the machine require that you meet certain requirements specific to your country. Please
make sure to respect them by contacting the authorities of your country, in order to respect them all.
Ensure temperature during transportation will never be out of temperature range given on chapter
storage
Switch the product off , make sure that all moving parts have come to a complete stop. Always carry
the product by its handle with the blade sheath attached. Protect the product from any heavy impact
or strong vibrations which may occur during transportation in vehicles. Secure the product to prevent it
from slipping or falling over. Do not expose the product to sunlight.
6. WINTERING
Follow all instructions given on chapter storage below.
We recommend using the original package for storage or covering the product with a suitable cloth or
enclosure to protect it against dust.
7. STORAGE
Illustration 29
Only store the machine in a clean, dry, ventilated place with a temperature of 4°C to 24°C. Cover it in
order to provide added protection. We recommend using the original package for storage or covering
the product with a suitable cloth or enclosure to protect it against dust. Be sure to secure the unit while
transporting
Remove the power line. Examine the unit thoroughly for worn, loose or damaged parts. Clean the unit
before storing. Do not expose the product to sunlight. Make sure the product is always protected from
cold and humidity.
8. MAINTENANCE
8.1 CLEANING
Maintenance
Keep all safety devices, air vents, and motor housing free of debris and dirt. Wipe down the equipment
with a cloth and/or compressed air. It is highly suggested that you clean the product after every use.
Do not use cleaning agents, as these can attack the plastic and weaken the structural integrity of the
chain saw.
Remove and brush clean the cover plate, chain and chain bar after 1 to 3 hours of use.
Clean the area under the cover plate, the drive sprocket and chain bar assembly using a soft brush.
Clean oil outlet with a clean cloth.
Do not place other objects on the chain saw.
EN
DANGER! Risk of injury due to electric shock. Remove the
power line and make sure that all moving parts have come
to a complete stop before adjusting, inspecting, cleaning or
storing the product.
19 and 28
284