10. Install the
left and right
slide rails (F and
G) to the left
and right panels
(2 and 3)
respectively.
F Left X1
16. As shown in the figure, fix
pulleys (J) to the left and right sides
of the small drawer panel (9) with
gaskets and cap nuts.
19. As shown in the figure, install the
disassembled left and right inner rails
on the left and right sides of the big
drawer panel (12) respectively.
G Right X1
14. As shown in the figure,
install the rear block of small
drawer (10) to the small drawer
panel (9) and fasten it in place.
17. Repeat steps 12-16 to complete
the installation of 2 small drawers.
20. As shown in the figure, install the
front block and rear block (13 and 14) to
the big drawer panel (12) and fasten the
front block of big drawer (13) in place.
11. As shown in the
figure, turn the
lock(H) clockwise
and install it on the
top panel (5) after
turning. Note that the
locking bar (8) needs
to be installed on the
lock.
15. As shown in the figure, connect the
front panel of small drawer (11) to the
small drawer panel (9) with screws.
06
www.costway.com
12. As shown in the figure, fold up
the left and right sides of the small
drawer panel (9) to 90 degrees as
shown in Figure 13.
18. As shown in the figure, fold up
the left and right sides of the big
drawer panel (12) to 90 degrees as
shown in Figure 19.
21. As shown in the figure,
connect the front panel (15) to
the front block of big drawer
(14) with screws.