Skil SHD77 Instrucciones De Funcionamiento Y Seguridad página 13

SM 1619X03173 11-08:SM 1619X03173 11-08 12/2/08 11:21 AM Page 13
TWIST-TO-LOCK CONNECTOR INSTRUCTIONS FOR MODELS SHD77 & SHD77M CODE 72
The Model SHD77 & SHD77M code 72 is
equipped with a "Twist-To-Lock" male connector
as shown. Use only a 3-wire extension cord
which has a mating "Twist-To-Lock" female
connector on one end and a 3-prong grounding
plug on the other end. (See Electrical Safety
section on page 2 for grounding information.)
If an extension cord is
W RNING
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and
receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
* Blade
* Wrench
** Carrying case
** Rip Fence
** Non-marring overshoe
All manuals and user guides at all-guides.com
ONLy 20 AMP, 125 VOLT "TWIST-TO-LOCK"
Accessories
-13-
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
25 50 100 150
3-6 18 16 16 14
6-8 18 16 14 12
8-10 18 16 14 12
10-12 16 16 14 12
12-16 14 12 — —
(*= standard equipment)
(**= optional accessories)
2
Wire Sizes in mm
Cord Length in Meters
15 30 60 120
0.75 0.75 1.5 2.5
0.75 1.0 2.5 4.0
0.75 1.0 2.5 4.0
1.0 2.5 4.0 —
— — — —