battery. Once the battery is fully charged, the light on the trimmer (Figure B)
will turn solid blue.
The trimmer has not been charged at the factory. Please charge the
trimmer for 2 hours before the first use for maximum performance.
You can keep the trimmer plugged into the charging stand or adapter
when not in use. The charging stand or adapter will maintain the battery
at full charge. We recommend that the charging stand or adapter be
unplugged if the trimmer won't be used for seven or more days.
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an
appliance you know is working).
2. Make sure on/off switch on the trimmer is OFF.
3. Check to make sure adapter cord is plugged firmly into trimmer or
charging stand. Twist the adapter cord slightly to ensure good electrical
connection.
4. If failure to charge still exists, return trimmer to Andis or an Andis
authorized service station for examination and repair or replacement.
A
E
I
BLADE
SCREWS
B
LIGHT
F
J
C
BOTTOM OF TRIMMER
G
K
D
H
OIL
5