GB FREELOADER PRO Manual Del Usuario página 4

All manuals and user guides at all-guides.com
2. To charge FreeLoader pro from its solar panels
Ensure the clear film has been removed from both solar
panels before first use. Detach the removable solar panel
(1, Fig 1) from the body of FreeLoader Pro (2, Fig 1) by
lifting up and separating the two halves exposing the face
of each solar panel. Then replace the top solar panel back
onto the FreeLoader Pro body with its panel facing up (as
shown on Fig 2).
When the solar panels are facing the
sun, the Power Halo LED's A and C
(see Fig 4) will turn red to indicate that
power is being delivered to Freeloader
Pro's internal battery. LED A indicates
a charge from the main body panel,
and LED C indicates a charge from the
removable panel.
NOTE – in bright light these LEDs may be
difficult to see. Cupping your hands about the
Power Halo will help.
Set FreeLoader Pro's Voltage Switch (3, Fig 1) to 5.5V when
charging from its solar panels -this will help improve the internal charging performance.
Note -Be careful not to scratch the surface of the solar panels and do not clean them with any
strong detergent.
3. Checking how much power is in the FreeLoader Pro's internal battery
To determine how much power is available in FreeLoader Pro simply press the Power Halo Test
Button (6, Fig 2).
Fig 4
A One b lue segment = 10%-25% power available – also turns red to indicate when a solar
charge is being delivered from Freeloader Pro's main solar panel to its internal battery
– (2, Fig 2)
B Two blue segments = 26%-50% power available
C Three blue segments = 51%-75% power available – also turns red to indicate when a solar
charge is being delivered from Freeloader Pro's removable solar panel to its internal battery
– (1, Fig 2)
D Four blue segments = 76%-100% power available
1
C
B
D
A
3
Fig 1
1
2
4
3
5
Fig 2
6
LED A indicates a
charge from the
main body panel
LED C indicates a
charge from the
removable panel
7
2