Installation; Pressing Out The Ventilation Opening - Dometic DM50NTE D CL Instrucciones De Montaje Y De Uso

DM50NTE D CL, DM50NTE F CL
Mini drawer
No in
fig. 5, page 5
1
2
6

Installation

!
CAUTION! Health hazard
To avoid a hazard due to instability of the device, it must be fixed in
accordance with the instructions.
6.1 Notes on mounting into furniture
You can mount the minibar in four ways into furniture. Choose your favored
alternative according to fig. 6, page 6.
Observe the following:
• The cut-out dimensions H x W x D are:
– DM50NTE D CL: 438 x 570 x 504 mm
– DM50NTE F CL: 438 x 570 x (502 + d) mm
d is the thickness of the hotel's own decor
• The clearance between the minibar's back and the furniture wall should be
approx. 15 mm.
• The ventilation openings for the chosen alternative have to be produced as
shown in fig. 6, page 6.
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
6.2

Pressing out the ventilation opening

fig. 8, page 7
➤ Produce a ventilation opening of 75 x 550 mm in the bottom of the furniture into
which you place the minibar.
Measure the distance of 504 mm from the minibar's door front excluding any
own decor.
EN
Description
Rotatable divider
Miniature bottle holder
Installation
17