BEFORE THE FIRST USE
•
Place charging dock indoors, on a hard-leveled surface, and against a
wall.
Place the charging dock in an open area, leaving at least 4 feet/1.5m
•
in the front of the charging dock and 1.5ft/0.5m feet on each side.
•
Plug the power cord into the charging station, then into the outlet.
•
Place the remaining cord behind the charging dock to prevent it from
getting in the way of HUVI as it cleans. NOTE: Always keep the charging
base plugged in, otherwise the vacuum will not automatically return to
it.
•
Remove the foam inserts beside the bumper.
•
Attach the side brushes to the bottom of HUVI by pressing the brush into
each slot until it clicks. Make sure to match the letter on the brush with
the letter on HUVI.
www.KALORIK.com
10
211104