Zeegma Zonder Klaar Manual De Usuario página 9

waste as it may pose a threat to the environment and human health. The
worn-out product must be handed over to the electrics and electronics
recycling center.
Description (fig. 1)
1. Vacuum cleaner main unit
2. Storage battery
3. Tube
4. Electric turbo brush
5. Wall holder with a charging feature
6. Crack nozzle
7. Upholstery nozzle
8. Nozzle with horsehair
9. Charger
10. Replaceable roll for soft surfaces
11. Replaceable roll for hard surfaces
12. Flexible tube (additional accessory, depending on a variant purchased)
13. Small turbo brush for upholstery and soft surfaces (additional accessory,
depending on a variant purchased)
Charging
Note! Remember to switch the vacuum cleaner off before you start charging!
The display will inform you about charging automatically.
ҋ
When the battery is full, the device will stop charging automatically.
ҋ
You can connect the device directly to the source of charging (fig. 2).
ҋ
You can disconnect and charge the storage battery directly by
connecting it to the charger (fig. 3).
ҋ You can charge the device on a wall holder, connected to the charger
(fig. 4).
How to use (fig. 5)
Switch the device on by pressing and holding the central key on the
handle. You can choose an additional option and press the side key to
lock the on/off switch.
Select the desired working mode on the touch display. When you
switch the device on and off, the auto mode always activates.
Description of the display (fig. 6)
1. Suction power
2. Battery level
EN