Tabla de contenido
Publicidad
OBJ_BUCH-518-009.book Page 15 Thursday, October 6, 2016 12:58 PM
Use the battery only in conjunction with your Bosch
power tool. This measure alone protects the battery
against dangerous overload.
The battery can be damaged by pointed objects such as
nails or screwdrivers or by force applied externally. An
internal short circuit can occur and the battery can burn,
smoke, explode or overheat.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic. Machines with electronic
control and right/left rotation are also suitable for screwdriv-
ing.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Depth stop
2 SDS-plus tool holder
3 Dust protection cap
4 Locking sleeve
5 Vibration damper
6 Handle (insulated gripping surface)
7 Rotational direction switch
8 On/Off switch
9 Selector switch for drilling/hammer drilling
10 Button for depth stop adjustment
11 Wing bolt for adjustment of auxiliary handle
12 Battery pack*
13 Battery unlocking button
14 Temperature control indicator
15 Battery charge-control indicator
16 Button for charge-control indicator
17 Auxiliary handle (insulated gripping surface)
18 Keyless chuck*
19 Front sleeve of the keyless chuck*
20 Rear sleeve of the keyless chuck*
21 Extraction sleeve of the dust extraction attachment*
22 Clamping screw for the dust extraction attachment*
23 Depth stop of the dust extraction attachment*
24 Telescopic pipe of the dust extraction attachment*
25 Wing bolt of the dust extraction attachment*
Bosch Power Tools
26 Guide pipe of the dust extraction attachment*
27 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Rotary Hammer
Article number
Speed control
Right/left rotation
Rated voltage
Rated power input
Output power
Impact rate
Impact energy per stroke
according to
EPTA-Procedure 05/2009
Speed
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Steel
– Wood
max. Diameter screw
Weight according to
EPTA-Procedure 01:2014
* depending on the battery pack being used
Battery
Permitted ambient temperature
– during charging
– during operation* and
during storage
Recommended batteries
* limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-6.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6:
Hammer drilling into concrete: a
=16 m/s
h
2
Drilling into metal: a
<2.5 m/s
, K=1.5 m/s
h
Screwdriving without impact: a
<2.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
English | 15
GBH 36 V-EC Compact
3 611 J03 R..
V=
36
W
430
W
320
-1
min
0–4850
J
1,8
-1
min
0–1500
SDS-plus
mm
48
mm
18
mm
13
mm
30
mm
6
kg
2.7–3.3*
°C
0...+45
°C
–20...+50
GBA 36V x,xAh H-.
2
2
, K=1.9 m/s
2
2
2
, K=1.5 m/s
1 609 92A 2P7 | (6.10.16)
Publicidad
Tabla de contenido
