Safety instructions
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure
that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and
agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application
and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all appli-
cable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and
others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and
warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit
documents.dometic.com.
Contents
1
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
2
Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4
Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
1
Safety instructions
DANGER! Failure to obey this instruction will cause death or seri-
ous injury.
Explosion hazard
• Fuels are highly flammable, releasing explosive fumes and potentially
posing a health risk under certain circumstances. The tank must be
constructively separated from the occupant compartment.
• Check hazards depending on the installation location in the vehicle
such as:
- Keep sufficient distance to ignition sources to avoid electrostatic
discharge.
- Observe the torque values for assembly.
- Provide a constructive protection against obstacles on the ground,
when the tank is mounted underneath the vehicle.
- Provide a protection for pipes or hoses to the fullest possible
extend (twisting/bending movements). Parts of the fuel system
must be attached to the vehicle in such a way that they are as well
protected as possible. The fuel system components must not be
subjected to friction, pressure or other excessive stresses due to
twisting, bending and vibration of the vehicle structure or drive
unit.
10
AG101
EN