16. The plug must be removed from the socket-outlet before the water reservoir is filled
with water
17. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
SPECIAL INSTRUCTIONS
1. To avoid a circuit overload, do not operate another high wattage appliance on the same
circuit.
2. If an extension cord is absolutely necessary, a 10-ampere cord should be used. Cords
rated for less amperage may overheat. Care should be taken to arrange the cord so that
it cannot be pulled or tripped over.
SAVE THESE INSTRUCTIONS
More specifically:
DO NOT let children or untrained persons use the appliance without supervision.
NEVER immerse the iron, cable or plug in any liquid.
DO NOT leave the hot iron touching fabrics or very inflammable surfaces.
DO NOT leave the appliance unnecessarily plugged in. Disconnect the plug from the
mains when the appliance is not being used.
NEVER touch the appliance with wet or damp hands.
DO NOT use the power cord or the appliance in order to pull the plug out of the socket.
DO NOT leave the appliance exposed to the weather (rain, sun, etc. ).
DO NOT leave the iron without supervision when it is connected to the power supply.
DO NOT fill the reservoir with water before removing the plug from the socket.
PLEASE NOTE!
Do not use chemical additive, scented substances or decalcifiers. Failure to comply with
the above-mentioned regulations leads to the loss of guarantee.
DESCRIPTION OF DEVICE
1. Spray organ, 2. Front cover, 3. Fill cover, 4. Steam knob, 5. Shot-steam button, 6.
Spray button, 7. Small lampshade, 8. Up handle, 9. Cord bush, 10. Handle, 11. Large
lampshade, 12. Thermostat knob, 13. Self-cleaning button, 14. Water tank, 15. Plastic
skirt, 16. Soleplate, 17. Fill cup
FEATURES
* Ceramic soleplate
* Dry/spray/steam/burst of steam/vertical steam
* Self-cleaning/anti-drip/anti-calc
* Variable steam control
* 360 degree swivel cord guard with indicate light
- 13 -