Iv- Remote Control - CONTINENTAL EDISON CEHFSBT17B4 Manual Del Usuario

INSTALLING BATTERIES INTO THE REMOTE
1. Remove the cover of the battery compartment on the back of the remote.
2. Insert two AAA 1.5V batteries while respecting polarities.
3. Place back the cover.
NOTE: 2 AAA 1.5V batteries are not included.
NOTES:
1. Please do not use rechargeable batteries
2. Do not mix different brand and type of batteries in the remote and do not mix new
and old batteries.
3. When the remote seems to have lost power, or the control range has shortened,
please install 2 new batteries.
4. If the remote will not be used for a long time, please take out the batteries and
store them in a dry and cool place.
5. Do not expose the remote to high temperature and humidity.
6. Never try to disassemble the remote.
7. Make sure to avoid reflections from mirrors or glass panels that could impair the
infrared signal of the remote.
8. The efficiency of the signal is optimum when the remote is operated at a distance
smaller than 5m from the sensor, and within an angle of 30°.
IV – REMOTE CONTROL
36