Installation Certificate From Specialised Company - GOK BC-2 Instrucciones Para El Montaje Y El Funcionamiento

INSTALLATION CERTIFICATE FROM SPECIALISED COMPANY

I hereby confirm that the following safety
equipment was installed correctly:
in accordance with the applicable assembly and operating manual. After ASSEMBLY, the
safety equipment underwent the start-up and a FUNCTION CHECK. Upon start-up, the
safety equipment operated properly. The operator was informed about the operation, care
and maintenance of the product in accordance with the assembly and operating manual.
Specialised company is
Operating medium or stored material
1)
More detailed description of the
operating medium
2)
To: proof of function from the manufacturer's tests:
Immerse the probe in the operating medium to be tested. Leave in a heating cabinet at
+ 60 °C for48 hours. Then carry out the specified FUNCTION TESTS at ambient temperature.
A certificate of the test and the result must be issued.
Manufacturer:
Fabricate no.
Approval / test mark:
Tank acc. to construction standard
Rated volume in litres:
Maximum admissible level
Adjusting dimension X =
Batch number
Artikel-Nr. 15 707 50
• To be kept by system operator!
• Important for any warranty claims!
 Overfill sensor type BC-2
 GOK device no.:
►
 specialised company according to water law
 (electrical installation) company
►
 Waste oil
 FAME
 Fuel oil
 Vegetable oil
 Water or oil-water mixtures
 Liquid fertiliser (AHL, ASL, HAS)
 JGS (liquid manure, semi-liquid manure and
silage effluent)
 other water-hazardous, non-flammable
liquids 1) + 2)
►
►
►
►
►
►
►
►
►
 Diesel fuel
 Urea solution
 Industrial oil
 Bio fuel oil
% (V/V)
BC-2
mm
37 / 133