Publicidad
OPERATION
Install a good quality 9V battery into the pedal by unscrewing
the base of the pedal and fitting the battery securely to the
battery connector and then replace the base of the pedal. Do
not use excessive force to tighten up the 4 base plate screws as
this could damage the screws.
When not in use it is always a good idea to remove the input
jack from your pedal to prevent any unwanted battery power
loss.
Caution - when you do not intend to use the pedal for a long
period of time, it is always advisable to remove the battery to
prevent current loss and battery leakage.
Alternatively - and highly recommended is the use of an
external good quality DC 9V PSU.
Publicidad
