PALSON Alaska Modo De Empleo página 35

GB
Do not switch immediately from Cold to Hot or from Hot to Cold. Leave the switch in the OFF position for about 3 minutes
before changing the operating mode. Otherwise, this may impair or damage the internal cooling system.
B- Using the ON/OFF and HOT/COLD switch
Power switch on top of the lid
Power switch on top of the lid
Power switch on top of the lid
MAINTENANCE
Dust or any other object blocking the ventilation openings will reduce the cooling effect. Use a vacuum cleaner or brush
to remove dust deposited on the inside or outside of the ventilation openings.
From time to time, remove the dust from the plug. Too much dust may cause a fire.
10
All manuals and user guides at all-guides.com
(1) Move the power switch to the left; the appliance
will start to cool when the AC or DC power cord is
connected.
(2) Move the power switch to the right; the appliance
will start to heat when the AC or DC power cord is
connected.
(3) Move the power switch to the centre; the appliance
will not operate even when the AC or DC power cord
is connected.