Wall Mounting - Teac MC-DX10MKII Manual Del Usuario

A SPEAKER
Connect the left and right speakers using the supplied RCA
cables.
Make sure to connect:
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
< If not using the included speakers, make sure the speakers
you use are at least 8 Ω impedance.
< Do not connect anything other than speakers to these
terminals.
B
DC IN/OUT
Connect the DC OUT terminal of the subwoofer and the DC
IN terminal of the main unit using the supplied cable.
C
AUDIO IN/OUT
Analog 2-channel audio signal is output from the AUDIO
OUT jack.
Connect the AUDIO OUT jack of the main unit and the
AUDIO IN jack of the subwoofer using the supplied cable.
D
FM ANTENNA
Connect the provided FM antenna to the FM ANTENNA
terminal.
While in FM mode, tune in an FM station and extend the
lead to find the best position for reception. This antenna
may need to be repositioned if you move your unit to a new
location.
FM Outdoor Antenna
In an area where FM signals are weak, it will be necessary to
use a 75-ohm unbalanced-type outdoor FM antenna using
an optional (not supplied) matching transformer connected
to an external antenna. Generally, a 3-element antenna will
be sufficient; if you live in an area where the FM signals are
particularly weak, it may be necessary to use one with 5 or
more elements.
E
AUX IN
You can connect a DVD player, VCR, etc. to this unit.
Connect the component with a commercially available RCA
cable.
Make sure to connect the white plug to the white jacks
(Left) and the red plug to the red jacks (Right).
F AC Power Cord
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the
power cord. Never pull or yank on the power cord.
G
POWER switch of the Subwoofer
Use this switch to turn the system on or off.
The equipment draws a nominal amount of power from
the AC outlet even with its POWER switch in the OFF
position.
< If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
To avoid loosing your settings, it is advisable to keep this
switch ON when not in use.
H Fuse
In case you cannot turn the subwoofer on, check the fuse
box on the rear panel of the subwoofer.
1. Unscrew the fuse cap using a screwdriver.
2. Check the fuse.
If the fuse has blown out, replace it with a new one.
3. Replace the fuse cap.

Wall Mounting

You can mount the main unit and/or the left and right
speakers on a wall.
Precautions
< Be aware that the length of the cables are approximately 2
m. Do not attempt to mount the main unit and the
speakers too far from the subwoofer.
< You need to have hooks available that snugly fit into the
hanging holes in the back of the unit.
< Drill holes into solid wall support, such as wooden frame or
concrete wall.
< Ensure that the unit locks onto the hooks and that the
hooks are strong enough to support the weight before
releasing the hands.
< Be aware of the best possible direction for receiving AM
broadcasts (this unit has no AM anntena you can turn
around).
5