BGS technic 70149 Manual Del Usuario página 8

INSTRUCTION
Support bridge (3/5/6), to be used as OEM T10323
Thrust pieces (9), to be used as OEM T10376
Remove clutch hub. Disassemble lock ring of the clutch (this
might be difficult because the clutch is under strong tension
Release the clutch by using the support bridge as shown in
the picture.
Puller (4/10), to be used as OEM T10373
After the disassembly of the lock ring you can attach the
puller as shown and disassemble the clutch by turning the
puller spindle.
Gauge block (2/7), to be used as OEM T10374 / T10466
You can adjust the position of the engaging bearings by
using the gauge block. Use a depth gauge for measuring.
For exact dimensions and detailed information about how to
do it, consult the manufacturer's handbook.
Assembly lever (1), to be used as OEM T10407
Used to operate the engaging lever during dismantling and
mounting of the mechatronic unit on 7-speed dual clutch
gearbox (code 0AM) and it is suitable for e.g. Audi A3
(2004-), VW Golf (2004-), Eos (2006), Passat (2006-),
Passat CC (2009-).
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed