Utilitech Pro WL160206 Manual Del Usuario página 5

OPERATING INSTRUCTIONS
CAUTION
To avoid being burned, always hold the work light by
its grip handle (A) when making adjustments.
WARNING
RISK OF FIRE. DO NOT place work light near
flammable or combustible surfaces.
Open the folding stand
1. Hold the light by one hand and pull the folding stand
(D) out. (Fig. 1a)
2. Adjust the lamp head (C) forward. (Fig. 1b)
3. Place the light to standing position. (Fig. 1c)
4. Adjust the lamp head to preferred position. (Fig. 1c)
NOTE: If screw (J) on folding stand (D) becomes loose
due to extensive use, use a Torx 20 head screwdriver
and a wrench (neither included) to tighten.
1
2
C
3
5
A
D
D
J