Antop AT-413 Manual De Instrucciones página 2

INSTRUCTIONS
Installation Instruction Manual
Your FLAT-SQUARE PANEL HDTV Antenna / AT-413 can be used either as an outdoor, RV or
attic antenna. ANTOP's New Generation Digital Technology allows you the flexibility to set up
your antenna in various locations and still receive a great digital reception.
ANTOP's New Generation Digital Technology
• Omni-Directional Reception with Enhanced VHF Range
• High Gain: Resigned to match similar gain of traditional bulky, unsightly mechanical antennas.
Following are instructions for installation options for outdoor use as a mast pole mount or wall
mount, as well as for indoor options in an attic or on an RV. Read through all instructions prior
to beginning installation procedure.
Note:
A higher mounting location positioned towards the broadcast tower may result in
better reception. Install the antenna as high as possible, and preferably with a clear path
between the antenna and the TV station transmitters. Trees, buildings, mountains, etc.,
can all impact the performance of any antenna. This antenna can also be placed in an
attic.
1 / Installation
Attach the bracket to the antenna unit using the screw and wing nut provided.
1.1 For Outdoor Use of House, Mast Pole Mounting
Install a mast pole (not provided) on the house, preferably on the side of the house facing the
TV station transmitters. Attach the antenna to the mast pole by using the clamp kit provided.
1
All manuals and user guides at all-guides.com
1