Using The Altimeter - Rocktrail Z29592 Instrucciones De Utilización Y De Seguridad

j 
P ress the ALTI / BARO button
until hPa (hectopascal), mb (millibar) or inHg (inches
of mercury) appear in the display
j 
P ress the MODE button
air pressure display will flash.
j 
P ress the RESET
value you want.
j 
I f you enter incorrect information, press the MODE
button
2
j 
P ress the ALTI / BARO button

Using the altimeter

Q 
cAUTIOn! Never use the altimeter on an aeroplane.
note: If the height measured is more than 9164 m /
30065 ft, "HI" will appear in the display
note: If the height measured is less than – 706 m /
– 2316 ft, "LO" will appear in the display
j 
P ress the ALTI / BARO button
the display
j 
P ress the ST. / STP. button
between the units of meters (m) and feet (ft).
note: The weather station automatically updates the
altimeter.
120 GB/MT
All manuals and user guides at all-guides.com
2
and ST. / STP.
1
again and enter a new value.
.
5
as often as necessary
3
.
5
for about 2 seconds. The
button to set the
4
to stop the adjustments.
3
.
5
.
5
until ALT appears in
3
for 2 seconds to choose
4