Troubleshooting - NewAir AB-1200B Manual Del Propietário

TROUBLESHOOTING

Problem
The beverage cooler
does not cool.
The beverage cooler
is not cold enough.
The beverage cooler
seems to make too
much noise.
An interior red light
is flashing.
Frost is building up
in the unit.
www.newair.com
Possible Causes
The unit may be
plugged in using a
different voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The external
environment may
require a higher
setting.
The cooler may be
placed too close to a
heat source.
There is insufficient
ventilation.
The door is not
completely closed or
the door seal is not
working properly.
The unit is not leveled.
There is insufficient
ventilation. The unit is
too close to a wall or
another surface.
The set temperature is
too low.
There is excess
humidity or the interior
temperature is too low.
Solution
Check if using the wrong
voltage.
Reset the circuit breaker or
check for a broken fuse
Lower the temperature of
the cooler.
Keep the cooler away from
direct sunlight or other heat
sources.
Place the beverage cooler in
an area with proper
ventilation and clearances.
Close the door tightly. Do not
open the door frequently and
do not keep the door open
for extended periods of time.
Replace the seal on the door
if necessary.
Adjust the unit's feet and
ensure the product is level.
Allow sufficient clearance
around the unit.
Adjust the set temperature
so that it is higher than the
beverage cooler's interior
temperature.
Turn off the beverage cooler,
unplug it, and remove the
frost buildup manually.
Reconnect the power once
the ice has thawed.
EN
12